Both pool shocking and pool backwashing maintain sparkling pool water. Backwashing involves redirecting the flow of water to unclog the pool filter. On the other hand, pool shocking entails sanitizing the pool by adding excess chlorine. Every pool owner needs to identify the right time to do this pool maintenance procedure. Otherwise, this procedure won’t be as effective as it should be. But should you conduct a pool backwash after shocking the pool?
Well, it is not compulsory to do this procedure immediately after shocking. Even so, it might be necessary to conduct a backwash after the pool shocking. Once you complete shocking your pool, always turn on your pool filter. Leave it on for about eight hours. If you still notice bather waste in the pool water, repeat the shocking process. One way to help you determine if you have to do this procedure is the pressure gauge reading. So, immediately you turn on the pool filter, take note of the pressure gauge reading. Then check it after some time. If the reading increases by eight or more units, it would be best to backwash the pool. Let’s take a look at a practical example. If the pressure gauge reading was 13 PSI and then increases to 21 PSI, conduct a backwash.
Generally, you ought to conduct this procedure once a week. The time, of course, varies depending on the condition of the pool. If your pool gets used frequently, you might have to do this pool maintenance procedure more. Also, if the surrounding environment dirties the pool, you need to backwash often.
Indisputably, this pool maintenance method goes a long way in maintaining a clean pool. This process boosts the functioning of the pool filter. Thus, it prevents the common pool problems caused by dirt. Nonetheless, you should avoid backwashing your pool if you have pool algae. Algae go back to the pool after a pool backwash.
Moreover, if your pool is constantly exposed to many debris and dirt particles, do not perform this pool maintenance procedure. Instead, use a vacuum or pool sweep to eliminate all these particles before backwashing the pool. Otherwise, you would clog the pool filter.
Before performing a pool backwash, it would be best to check whether the pool qualifies for this procedure. Often, pool owners check the pressure gauge reading. If the reading exceeds by more than eight units, the procedure is necessary. Pool backwashing unclogs the pool filter and promotes its functioning.
Powered by BetterDocs
You must be logged in to post a comment.
Username or email address *
Lost your password?