It is important to shock a pool once in a while. Pool shocking offers maximum disinfection for your pool. Also, this process safeguards your pool from common pool problems. But how do you do this process?
Detailed process of how to shock a pool #
Step one: Wear protective clothing #
You have to protect yourself before you start to shock a pool. Wear protective garments to protect your skin and eyes from harmful chemicals. Chlorine is the main chemical used for pool shocking. It can bleach your clothes and burn your skin. Therefore, wear protective clothing first.
Step two: Prepare the chemicals #
After you wear your protective garments, begin preparing your chemicals. Always take time to read and understand all the guidelines outlined in the chemical manual. The preparation methods differ depending on the form of chlorine you use. For instance, you will need to dissolve a granular shock in five gallons of water before you can add it to the pool. On the other hand, you can add lithium hypochlorite directly into the pool without diluting it with water. Also, determine the appropriate quantity of chlorine to use depending on the size of the pool.
Step three: Shock the pool #
Add the solution into the pool based on the manufacturer’s guidelines. In some cases, you will need to pour the shock solution along the pool edges. On the other hand, some pool professionals will require you to pour the solution close to the water features.
Step four: Leave the pool overnight #
After pouring the solution, please leave it in the pool for some time. On average, you should leave the pool for approximately 12 hours. It will be much easier for you to leave the pool overnight when it’s not in use. Ensure that no one gets into the pool during this time. If you have a commercial pool, notify your clients to stay away from the pool.
Step five: Check your pool chemistry #
After the 24-hour period has passed, test the pH of your swimming pool. Make sure the pool has a pH that ranges between 7.3 to 7.6. Also, ensure that you have the correct calcium hardness levels. If you notice your pool’s pH is low, add sodium bicarbonate. If you have a high pool pH, add muriatic acid to achieve balanced water chemistry.
Step six: Turn on your pool filter #
You need to switch on your pool filter for at least 24 hours when you shock a pool. The pool filter will get rid of all impurities and unwanted particles in the pool.
It is critical to perform a pool shock. Even so, you have to follow all the detailed steps involved about how to shock a pool.
You must be logged in to post a comment.